5-2-1 Check orientation of basement
5-2-2 Use templates “template for base” and mark the hole for cable
5-2-3 Drill and widen the hole
5-2-4 Cut Universal Plate and divide into 4
5-2-2 Cut between holes by Nipper
5-2-5 Drill 3mm hole the center of the basement
5-2-6 Set plate “b” at the basement and drill 1 hole
5-2-7 After drill one hole and set screw, drill other one
and after drill 2 holes, remove the palate.
5-2-8 Build “a-1”, “a-2” with L angle frame and screw them
5-2-10 Set “a-1”, “a-2″,”b” at the basement