List of Materials for 1 Mugbot 08/2017
We need tobuy and collectr Mugbot’s materials by oneself.
Like to get most of the materials all over the world from Web shop.
if you visit Japan, like to buy “Mugbot materials kit” at “Sengoku Densho No2 building “ Akihabara.
Mugbot materials kit
(their photos and URL are at the end of a sentence)
Mugbot Book (Japanese, if any)
Plastic boul for Mugbot head 1pc
Plastic case for Mugbot body 1pc
Raspberry Pi (Raspberry Pi B, B+ ,2 , 3 ) 1pc
USB AC Adapter for Raspberry Pi ( 2.5A for Raspberry Pi 3 or more) 1pc
Arduino Leanardo ( Duemilanove,Uno2 ,Uno3 ,Leonard or compatible Arduino) 1pc
Micro SD Card 8GB or more , Class 10 and Adaptor for Raspberry Pi 1pc
Small Servo Motor(RB90 or others) 2pcs
Mini Bread Board 1pc
Micro USB Cable( 150 mm or more adapted your Arduino type) 1pc
LAN cable (1000mm or more) 1pc
Jumper Wires
155mm long jumpers with male connectors on both ends 10pcs (11pc if you use Arduino without “IOREF” pin)
155mm long jumpers With male and female connectors 8pcs (14 pc if you use Arduino without “IOREF” pin)
Prebented short jump wires 1 set
LED White 10mm 2pcs
LED White 5mm auto blink 3pcs
LED Cap for LED 5mm 3pcs
Register 330Ω(1/4w) 5pcs
TAMIYA Universal Plate L(210x160mm) 1pc
TAMIYA Universal Metal Joint Parts (4pcs.) 1pc
M3 15mm screw 10pcs
M3 10mm screw 17pcs ( 18pcs screws are atattched with TAMIYA Universal Plate L)
0.2mm or 0.3mm plastic sheet ( 126mm square or more ) 1pc
Speaker with amplifier and 3.5mm Audio cable 1pc
If any
Hexagon nut with flange 27pcs (our favorite)
Mugbot Book
“Oshaberi Robot ‘Mugbot’ Ra Zupai to Arduino De Denshi Kosaku”
Koike Seita
You can know how to make Mugbot with the book
The book is written by Japanese. But I hope this will be of some help.
We hope that the book is published in English or several language.
Plastic PP Fruit Cream Color Mixture Bowls (4 colors) 1 piece
Japanese plastic body case “Naruhodo” Pack (dried food) 1 piece
It is a pack dried foods case Sanada delicate work indeedIt is a pack dried foods case Sanada delicate work indeed
Raspberry Pi 3 1 piece
We use “Raspberry Pi 3” (8/2017)
Arduino Leonardo 1 piece
We use “Arduino Leonardo”. You can use other Ardino ( Duemilanove,Uno2 ,Uno3 ,Leonardo or compatible Arduino)
Micro SD Card 8GB or more , Class 10 and Adaptor 1 piece
Mini Servo Motor(RB90 or others) 2 pieces
You can use other mini servo Motors.
You may use them (But we do not test them.)
Farnell element14
SparkFun
RobotShop
RobotShop
Pololu
Mini Breadboard 1 piece
You may use them (But we do not test them.)
USB AC Adapter for Raspberry Pi ( 2.5 A or more) 1 piece
Micro USB Cable ( 150 mm or more , connect between Raspberry Pi and Arduino) 1 piece
(if you use Arduino without Leonardo, you should use USB cable Type-B or adapted cable )
LAN cable (100mm or more) 1 piece
Jumper Wires
You may use them (But we do not test them.)
155mm long jumpers M/M 10 piece (11 piece if you use Arduino without “IOREF” pin) Farnell element14
SparkFun
155mm long jumpers M/F 8 pieces(14 piece if you use Arduino without “IOREF” pin)
Farnell element14
SparkFun
Prebented short jumper wires 1 set
You may use them (But we do not test them.)
LED White 10mm 2 pieces
You may use them (But we do not test them.)
(It is good that its “foot ” is long for making Mugbot.)
LED White 5mm auto blink 3 pieces
You may use them (But we do not test them.)
LED Cap 5mm 3 pieces
You may use them (But we do not test them.)
Register 330Ω(1/4w) 5 pieces
You may use them (But we do not test them.)
eBay
TAMIYA Universal Plate L(210x160mm) 1 piece
TAMIYA
Pololu
Little Bird Electronics
TAMIYA Universal Metal Joint Parts (4pcs.) 1 piece
TAMIYA
Pololu
Amazon
Little Bird Electronics
M3 15mm screw 10 piece
M3 10mm screw 17( 18 screws are atattched with TAMIYA Universal Plate L)
0.2mm or 0.3mm plastic sheet ( square 126mm or more on a side ) 1 piece
Speaker with amplifier and 3.5mm Audio cable 1 piece
You can use your own speaker.
If any
Hexagon nut with flange 27 pieces